ACE Your CPCS Blue Card Renewal – RT33 Agricultural Tractor Test with 129 Practice Questions and Answers!

1. Why is it hazardous to talk to others at ground level while leaning out of the back window of a tractor?

 

A) It’s not hazardous at all

B) Operators may get tired

C) Operators may unintentionally move an attachment

D) It improves visibility

 

Correct Answer: C) Operators may unintentionally move an attachment

 

2. What precaution should be taken when connecting an implement to the tractor’s rear (three-point) linkage arms?

 

A) Ensure there are personnel directly behind the tractor

B) Keep the area behind the tractor and implement clear of personnel

C) Raise the implement as high as possible

D) Operate the hydraulic lever from the rear

 

Correct Answer: B) Keep the area behind the tractor and implement clear of personnel

 

3. What could happen if an operator ignores a minor fault in an agricultural tractor?

 

A) Improved performance

B) Increased visibility

C) Reduced fuel consumption

D) Accidents and injuries

 

Correct Answer: D) Accidents and injuries

 

4. What must be checked regarding the function of the PTO drive?

 

A) That it disengages in neutral

B) Fuel efficiency

C) Engine speed

D) Tire pressure

 

Correct Answer: A) That it disengages in neutral

 

5. What should be done before connecting the PTO shaft to the tractor?

 

A) Turn on the engine

B) Engage the handbrake

C) Adjust the implement’s operating speed

D) Lower the drawbar

 

Correct Answer: B) Engage the handbrake

 

6. What should be done with the tractor’s rear link arms after connecting a drawbar or trailer implement?

 

A) Keep them raised at all times

B) Lower them as far as possible

C) Keep them clear of the implement’s drawbar

D) Keep them in contact with the implement’s drawbar

 

Correct Answer: C) Keep them clear of the implement’s drawbar

 

7. What factor should be considered regarding the weight of a trailer or bowser when connecting it to a tractor?

 

A) The tractor’s paint color

B) The type of music played in the cab

C) The tractor’s engine size

D) The weight of a fully loaded trailer

 

Correct Answer: D) The weight of a fully loaded trailer

 

8. Why should an operator report any defects in an agricultural tractor, no matter how minor?

 

A) To prevent accidents and injuries

B) To improve engine performance

C) To avoid work

D) To reduce cleaning efforts

 

Correct Answer: A) To prevent accidents and injuries 

 

9. Why should the guards of the PTO shaft fully cover the rotating universal joints?

 

A) To improve tractor performance

B) To enhance operator comfort

C) To prevent accidents

D) To reduce engine wear

 

Correct Answer: C) To prevent accidents

 

10. What are tractors increasingly used for within the construction and allied sectors?

 

A) Hauling heavy loads

B) Driving powered implements

C) Transportation of personnel

D) Generating electricity

 

Correct Answer: B) Driving powered implements

 

11. Why is leaning out of the back window of a tractor hazardous when talking to others?

 

A) It improves communication

B) It prevents unintentional movement

C) It is a safe practice

D) It may lead to fatigue

 

Correct Answer: D) It may lead to fatigue

 

12. What is the primary purpose of the hand or parking brake on an agricultural tractor?

 

A) To hold the tractor in place when not in use

B) To assist in steering

C) To improve visibility

D) To reduce engine noise

 

Correct Answer: A) To hold the tractor in place when not in use

 

13. What is one vital check an operator should make on an agricultural tractor before work starts?

 

A) Checking the cab glass

B) Cleaning the wheels

C) Inspecting the hand or parking brake

D) Starting work immediately

 

Correct Answer: C) Inspecting the hand or parking brake

 

14. What precaution should be taken before attaching any implement to a tractor?

 

A) Check the tractor’s tire pressure

B) Ensure compatibility between the implement and the tractor

C) Clean the implement thoroughly

D) Inspect the tractor’s headlights

 

Correct Answer: B) Ensure compatibility between the implement and the tractor

 

15. Why should compatibility between the implement and the tractor be checked before attachment?

 

A) To verify the tractor’s fuel level

B) To determine the implement’s color

C) To measure the tractor’s tire pressure

D) To ensure safe and proper operation

 

Correct Answer: D) To ensure safe and proper operation

 

 

rt33 test, rt33 practice test, rt33 mock test, rt33 questions, rt33 exam, rt33 cpcs, rt33 agriculural tractor, citb rt33 test, nocn rt33, cpcs rt33, rt33 theory test, rt33 revision, rt33 training, rt33 course, rt33 lesson, agricultural tractor test, agricultural tractor practice, agricultural tractor questions, agricultural tractor mock exam, agricultural tractor citb test