Nail Your CPCS RT36 Lorry Loader Renewal: 139 Q&A to Crush It!

 

 1:  What additional requirement is mentioned regarding lorry loaders and their loader crane’s height?

 

The loader crane must be hidden from view

A visual warning system must indicate if the crane is above a pre-set travelling height

The loader crane must be manually lowered

The loader crane must be painted in a specific color

 

Correct Answer: B. A visual warning system must indicate if the crane is above a pre-set travelling height

 

 2: What could be the effect if stabilisers are only partially extended?

 

Improved stability

No impact on stability

Reduced stability; the vehicle becomes less stable

Increased lifting capacity

 

Correct Answer: C. Reduced stability; the vehicle becomes less stable

 

 3: Why is it mentioned that operators can’t estimate the weight of a load by its shape, height, width, and length alone?

 

The load’s weight is primarily influenced by its size and density

The load’s weight is determined by its packaging material

Operators lack the necessary skills

Operators can accurately estimate weight based on shape and dimensions

 

Correct Answer: A. The load’s weight is primarily influenced by its size and density

 

 4: Why does the handling of loads require care?

 

To increase the speed of lifting operations

To avoid damage to the vehicle

To prevent damage to lifting accessories and slings

To save time during the lifting process

 

Correct Answer: C. To prevent damage to lifting accessories and slings

 

5: What condition can a load be heavier than marked?

 

If the load is in perfect condition

If the load is covered in dry packaging

If the load is made of non-porous material

If the load is covered in packaging that has soaked up water

 

Correct Answer: D. If the load is covered in packaging that has soaked up water

 

 6: What factors should be identified in a lift plan?

 

Risks, measures to mitigate risks, load details, and sequence of work

Only the type of lifting accessories

Only the weight of the load

Only the type of load

 

Correct Answer: A. Risks, measures to mitigate risks, load details, and sequence of work

 

 7: When is the least stable state of the lorry loader?

 

When the vehicle has maximum loads on its carrying platform

When the vehicle has no loads on its carrying platform

When the stabilizers are fully extended

When the boom is at its maximum height

 

Correct Answer: B. When the vehicle has no loads on its carrying platform

 

 8: In cycle-related incidents, where are cyclists often positioned in relation to the vehicle?

 

Behind the vehicle

In front of the vehicle

On the driver’s right side

On the driver’s left side

 

Correct Answer: B. In front of the vehicle

 

 9: How is the operating radius defined?

 

The vertical distance from the crane’s base to the hook

The distance from the crane’s hook to the ground

The total distance covered by the crane during lifting operations

The horizontal distance from the crane’s base to the hook

 

Correct Answer: D. The horizontal distance from the crane’s base to the hook

 

 10: What potential consequence is highlighted if the loader crane is not level, especially on sloping ground?

 

The radius for the load may exceed the safe maximum

The load weight will decrease

The lifting speed will increase

The crane and vehicle become more stable

 

Correct Answer: A. The radius for the load may exceed the safe maximum

 

 11: What happens to the load in each leg of a multi-legged chain sling if the included leg angles are increased beyond 90 degrees?

 

The load in each leg remains the same

The load in each leg is decreased

The load in each leg is increased

The load in each leg becomes unstable

 

Correct Answer: C. The load in each leg is increased

 

 12: What condition is essential for lorry loaders to lift loads?

 

The crane being equipped with stabilizers

The load being exceptionally heavy

The crane being operated remotely

The vehicle being level both longitudinally and laterally

 

Correct Answer: D. The vehicle being level both longitudinally and laterally

 

 13: What is the load in each leg when using a two-legged chain sling?

 

The load in each leg is equal to the total load

The load in each leg is half of the total load

The load in each leg is double the total load

The load in each leg is triple the total load

 

Correct Answer: B. The load in each leg is half of the total load

 

 14: What has been identified as a common cause of vehicle overturns?

 

Partially extending stabilizers

Fully extending stabilizers

Using larger spreader mats

Checking ground conditions

 

Correct Answer: A. Partially extending stabilizers

 

 15: How can ground-bearing pressure be reduced through each outrigger?

 

By increasing the load weight

By using smaller spreader mats

By using spreader or support mats

By reducing the size of the outrigger

 

Correct Answer: C. By using spreader or support mats

 

rt36 lorry loader training, rt36 lorry loader test, rt36 mock test, rt36 practice test, rt36 exam questions, rt36 theory test, rt36 citb test, rt36 nocn test, rt36 cpcs test, hiab lorry loader training, hiab lorry loader practice, hiab lorry loader exam, a36 lorry loader training, a36 mock test, a36 practice exam, cpcs a36 test, cpcs rt36 test, cpcs mock test, cpcs practice test, cpcs blue card test